 |
|
|
||||||||||||
|
||||||||||||||
 |
| Home > Products > Power Supplies > SDP Series> SDP Specifications |
| SDP-T Series Specifications |
Click here for a printable copy: |
|
24
Volt Models (see
other voltages in next table below) |
||
|
Description |
Catalog Number |
||||
| SDP06-24-100T |
SDP1-24-100T |
SDP2-24-100T |
SDP4-24-100RT | SDP4-24-100LT | |
| List Price ($ USD) | 69.00 | 99.00 | 129.00 | 169.00 | 169.00 |
|
Input |
|||||
| Input Voltage | 85-264 VAC, 90-375 VDC | AC
85-132 / 176-264 (Auto Select) or DC 210-375 V |
|||
| Input Frequency | 43-67 Hz | ||||
| Input Current | 0.4 A / 0.25A | 0.7A / 0.4A |
1.1A / 0.7A |
2.2 A / 1.2 A | |
| External Fusing | Not required. Unit provides internal fuse (T3A, not accessible) | ||||
| Hold-Up Time | >25 ms | ||||
| Efficiency | > 80% typ. | > 83% typ. | > 86% typ. | > 88% typ. | |
| Losses | < 3.75 W typ. | < 6.1 W typ. | < 8.1 W typ. | < 12 W typ. | |
|
Output |
|||||
| Output Voltage |
24 V (22.5-28.5 VDC adj.) |
||||
| Voltage Regulation |
Static 0.5% Vout
, |
||||
| Ripple/Noise1 |
< 50 mVpp |
||||
| Overvoltage Protection (OVP) |
> 30 VDC, but < 33 VDC, auto recovery |
||||
| Output
Noise Suppression |
Radiated EMI values below EN61000-6-2 |
||||
| Rated Continuous Loading |
0.63
A @ 24 VDC, 0.54 A @ 28 VDC |
1.3
A @ 24 VDC, 1.1 A @ 28 VDC |
2.1 A @ 24 VDC, 1.8 A @ 28 VDC |
4.2
A @ 24.5 VDC 3.6 A @ 28 VDC |
3.8 A @ 24.5 VDC |
| Overload Behavior |
Continuous operation at overload/short-circuit: up to 1.5 x Nominal Current Continuous. |
||||
| Protection |
Unit is continuously protected against short-circuit, overload and open-circuit. |
||||
| Power Back Immunity | 35 V | ||||
|
Installation |
|||||
|
Case & Mounting |
Molded plastic housing using UL 94 approved flameproof material rating 94V-2. Simple snap-on to DINTS35/7.5 or TS35/15 rail system. |
||||
| Status Indicators |
Green LED on when Vout = “OK”. |
||||
| Dimensions (in/mm)(H x W x D) |
2.95
in x 0.9in x 3.8in |
2.95
in x 1.77 in x 3.58 in
75 mm x 45 mm x 91 mm |
2.95
in x 2.85 in x 3.8 in |
||
| Weight (lbs/g) | 0.35 lbs (150 g) | 0.5 lbs (240 g) |
0.7 lbs (320 g) |
||
| Mounting Orientation |
Standard:
Vertical |
||||
| Ventilation/Cooling
•Free space for cooling |
Normal
convection, no fan reqiured |
||||
| Connection
•Connector size range |
Input:
screw terminals, connector size range: 20-12AWG (1.5-6mm2) for
solid or stranded conductors.
|
||||
|
General |
|||||
| Temperature |
Storage:
-25°C...+85°C Operation. -10°-60°C
full power with linear derating to half power from 60°C
to 70°C. (Convection cooling, no forced air required).
|
||||
| MTBF | > 500,000 hrs according to Telcordia/Bellcore Document SR-332, Issue 1 | ||||
| Humidity |
Up to 90% noncondensing, IEC 68-2-2, 68-2-3 |
||||
| Electromagnetic Emissions (EME) |
EN
61000-6-3 (includes EN 61000-6-4) Class B (EN 55022) incl. Annex
A
|
||||
| Electromagnetic
Immunity (EMI) |
EN 61000-6-2 (Includes EN 61000-6-1) (EN55024) Criterion A: no degradation of performance. |
||||
| Safe Low Voltage | SELV (acc.EN60950) | ||||
| Prot.
Class/ Voltage |
IP20
(IEC529), Protection Class 1 (IEC536)
|
||||
| Warranty |
3 years |
||||
|
Safety |
|||||
| CB Scheme, EN60950, EN50178, EN60204, EN60079-15 (Class 1, Zone 2 Hazardous Locations, Temp Class T3), UL508 Listed, cULus, UL 60950, cURus, CE (LVD 73/23 & 93/68/EEC). (EMC 89/336 & 93/68/EEC). EN61000-3-2, NEC Class 2 power supply acc. To NFPA 70 art. 725-41 (a)(2).2 | |||||
| Note:
1. Ripple/noise is stated as typical values when measured
with a 20 MHz, bandwidth scope and 50 Ohm resistor. |
|||||
| Other Voltages |  |
|
|
|
||
|
Description |
Catalog Number | |||
|
SDP 5-5-100T |
SDP 2-12-100T | SDP 3-15-100T |
SDP1-48-100T |
|
| List Price ($USD) | 110.00 | 123.00 | 136.00 | 124.00 |
|
Input |
||||
| Input Voltage | 85-264 VAC, 90-375 VDC | |||
| Input Frequency | 43-67 Hz | |||
| Input Current | 0.6A
@ 102 VAC 0.33A @ 196 VAC |
<1.0
A @ 102 VAC <0.6 A @ 196 VAC |
<1.0
A @ 100 VAC |
|
| External Fusing | Not required. Unit provides internal fuse (T3A, not accessible) | |||
| Hold-Up Time | > 25 ms | |||
| Efficiency | > 80% typ. | > 86% typ. | 90% typ. | |
| Losses | 7.5 W typ. | 8.1W typ. | ||
|
Output |
||||
| Output Voltage |
5-5.5 VDC (5-6 min adj.) | 12 VDC (9.9-12.1 min adj.) | 15 VDC (11.9-15.1 min adj.) | 48 VDC (48-56 min adj.) |
| Voltage Regulation |
<
2& Dynamic; < 0.5% Static
|
|||
| Ripple/Noise1 |
< 50 mVpp |
|||
| Overvoltage Protection (OVP) |
< 6.7 VDC |
< 18 VDC |
< 20 VDC |
< 60 VDC |
| Output
Noise Suppression |
Radiated EMI values below EN61000-6-2 |
|||
| Rated Continuous Loading |
Iout
5A @ Vout = 5.1 V |
3
A @ 10 VDC, 2.5 A @ 12 VDC |
4.2
A @ 12 VDC, 3.4 A @ 15 VDC |
Up to 1.05 A @ 48 V 0.9 A @ 56 V |
| Overload Behavior |
Continuous operation at overload/short-circuit: up to 1.5x Nominal Current Continuous. |
|||
| Protection |
Unit is continuously protected against short-circuit, overload and open-circuit. |
|||
| Power
Back Immunity |
10 V | 22 V | 80 V | |
|
Installation |
||||
| Case & Mounting |
Molded plastic housing using UL 94 approved flameproof material rating 94V-2. Simple snap-on to DINTS35/7.5 or TS35/15 rail system. |
|||
| Status Indicators |
Green
LED on when Vout = “OK”.
|
|||
| Dimensions (in/mm) (H x W x D) |
2.95
in. x 1.77 in. x 3.58 in. |
|||
| Weight (lbs/g) | 0.5 lbs (240 g) | |||
| Mounting Orientation |
Standard:
Vertical |
|||
| Ventilation/Cooling
•Free space for cooling |
Normal
convection, no fan reqiured. |
|||
| Connection
•Connector size range |
Input: screw terminals, connector size range: 20-12 AWG (1.5-6mm2) for solid or stranded conductors. |
|||
|
General |
||||
| Temperature |
Storage:
-25°C...+85°C Operation. -10°-60°C
full power with operation to 70°C possible
with a linear derating to half power from 60°C to 70°C. (Convection cooling, no forced air required). |
|||
| MTBF |
>
500,000 hours according to Telcordia/Bellcore Document SR-332,
Issue 1
|
|||
| Humidity |
Up to 90% RH, noncondensing, IEC 68-2-2, 68-2-3 |
|||
| Electromagnetic Emissions (EME) |
EN
61000-6-3 (includes EN 61000-6-4) Class B (EN 55022) incl. Annex
A
|
|||
| Electromagnetic
Immunity (EMI) |
EN 61000-6-2 (Includes EN 61000-6-1) (EN55024) Criterion A: no degradation of performance. |
|||
| Safe Low Voltage |
SELV
(acc. EN60950)
|
|||
| Prot.
Class/ Voltage |
IP20
(IEC529), Protection Class 1 (IEC536)
|
|||
| Warranty |
3 years |
|||
|
Safety |
||||
| CB Scheme, EN60950, EN50178, EN60204, EN60079-15 (Class 1, Zone 2 Hazardous Locations, Temp Class T3), UL508 Listed, cULus, UL 60950, cURus, CE (LVD 73/23 & 93/68/EEC). (EMC 89/336 & 93/68/EEC). EN61000-3-2, NEC Class 2 power supply acc. To NFPA 70 art. 725-41 (a)(2). | ||||
| Notes: 1. Ripple/noise is stated as typical values when measured with a 20 MHz, bandwidth scope and 50 Ohm resistor. 2. Not to exceed 30 watts total. |
||||
What's New | Products | Cross Reference | Technical Support | Contact Us | Search | Home
Copyright © 2004 Sola/Hevi-Duty. All Rights Reserved.