
	Catalog Pages
	Manuals/Specifications

Home > Products > Power Supplies > GL Series > GL Series Compact

GL Series Compact: Single Output Switchers

The GL Compact Series combines both medical and non-medical approvals into one unit. These models offer very high reliability, high efficiency, active Power Factor Correction, compact size and very low ground leakage current.

Each model of GL100-M and GL200-M series complies with the medical and ITE safety standards, enabling it to be used for both medical or non-medical standard applications.

The Dimensions, Pin Assignments and Mating Connectors are listed in the Catalog Pages pdf.

On this page: Features, Specifications, Selection Table

Features

Medical Approvals
Smaller Size
Dual Rating
High demonstrated MTBF
Automatic overvoltage protection
Overload protection
Extensive safety approvals
Two year limited warranty

Specifications

	GL100-M Series	GL200-M Series
Input
Input Voltage	90 - 264 Vac; 120 - 300 Vdc
Frequency	47-63 Hz
Inrush Current	50 A max., cold start @ 25°C
Efficiency	88% typical at full load
EMI/RFI	FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted; VDE0878PT3 Class B conducted
Power Factor	0.99 typical
Safety Ground Leakage Current	275 uA @ 50/60 Hz, 264 Vac input
Output
Power	100 W convection (80 W for GLS102-M)	125 W for convection; 200W
Adjustment Range on Main Output	±10% minimum on the main outputs
Fan Output	12 V @ 1 A isolated, ±5%
Hold-up Time	10 ms @ 150 W load, 120 Vac input	16 ms @ 250 W load, 120 Vac input
Overload	Short circuit protection on all outputs. Case overload protected @ 110-160% above rating
Overvoltage Protection	15-35% above nominal output
Logical Control
Power Failure	Open collector logic signal goes high 100-500 msec after main output; it goes low at least 6 msec before loss of regulation
Remote Sense	Compensates for 0.5 V lead drop minimum; Will operate without remote sense connected, Reverse connection
General
Temperature	Storage: -40°C to +85°C; Operating: 0° to 50°C ambient. Derate each output 2.5% per degree from 50° to 70°C, -20°C start up.
Electromagnetic Susceptibility	Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3
Humidity	Operating; non-condensing 10% to 95% RH
Vibration	IEC68-2-6 to the levels of IEC721-3-2
MTBF	>550,000 hours demonstrated at full load, and 25°C ambient conditions
Safety	IEC/EN/UL 60950-1, IEC/EN/UL 60601-1

Selection Table

Medical and Non-Medical Series
	Catalog Number	Description	Output 1	Output 2	Output 3	Output 4	Case*	Pin Assignments*	Mating Connectors*
GL100-M	GLS102-M	5 V 150W 2” X 4”	5 V @ 16 A [24 A]	-	-	-	1	1A	1B
	GLS103-M	12 V 150W 2” X 4”	12 V @ 8.3 A [12.5 A]	-	-	-
	GLS104-M	15 V 150W 2” X 4”	15 V @ 6.7 A [10 A]	-	-	-
	GLS105-M	24 V 150W 2” X 4”	24 V @ 4.2 A [6.3 A]	-	-	-
	GLS108-M	48 V 150W 2” X 4”	48 V @ 2.1 A [3.1 A]	-	-	-
GL200-M	GLS202-M	5 V 250W 3” X 5”	5 V @ 20 A [40 A]	-	-	-	2	2A	2B
	GLS203-M	12 V 250W 3” X 5”	12 V @ 10.3 A [20.8 A]	-	-	-
	GLS204-M	15 V 250W 3” X 5”	15 V @ 8.3 A [16.6 A]	-	-	-
	GLS205-M	24 V 250W 3” X 5”	24 V @ 5.2 A [10.4 A]	-	-	-
	GLS208-M	48 V 250W 3” X 5”	48 V @ 2.6 A [5.2 A]	-	-	-

*Refer to GL Compact Series Dimensions, Pin Assignments and Mating Connectors in Catalog pages pdf.

SolaHD Power Supplies - Power Supply / DIN Rail Products